Drawn Bright Steel

From EZM you can get bright steel in drawn, ground, ground and polish, and peeled versions in a wide variety of alloyed and plain carbon steel grades.




EZM Edelstahlzieherei Mark is your supplier of high-quality products of antifriction bearing steel.




EZM Edeltahlzeiherei Mark manufactures balls, rollers, needles and pins for ball bushes made of high-quality ball bearing steel.







BRIGHT STEEL / EZM_Driveline_Blankstahl



EZM Driveline – This is the brand name under which EZM can supply you with drawn bright steel, ground bright steel and ground-and-polished bright steel in virtually all cold-formable alloyed and carbon steel grades.


Our bright steel is characterised by great dimensional accuracy and high-quality, bright surfaces. Compared to rolled and forged products, cold-drawn bright steel offers the advantage of a greater range of processing options.


Of very special importance in this context is a lead-alloyed carbon steel for diesel injection pumps. The unique properties of this EZM speciality offer the perfect answer to such contradictory demands as maximum pressure resistance, on the one hand, and optimum machining properties, on the other. EZM is also a specialist for the processing of antifriction bearing steel/ball bearing steel, as well as alloyed high-grade structural steel.




Nozzle body


Düsenkörper Blankstahl


Nozzle body


Düsenkörper Blankstahl


Injector body


Injektorkörper Blankstahl


Injection nozzle






 >> Current alloy surcharges



>> Current scrap



Versions and Forms Supplied




  • From 2.0 mm to 28.0 mm round, tolerance zone IT 9
  • Min. bar length 2,000 mm
  • Max. bar length 5,000 mm (2.0 mm to 6.0 mm round)
  • Max. bar length 7,000 mm (6.0 mm to 16.0 mm round)
  • Max. bar length 9,000 mm (> 16.0 mm round and on request)
  • Length tolerance ± 25.0 



  • From 0.5 mm to 32.0 mm round, tolerance zone IT 6 (Rm up to 1,600 N/mm² for bright steel for standard parts)
  • > 32.0 mm to 60.0 mm round, tolerance zone IT 8
  • Min. bar length 1,500 mm (0.5 mm to 8.0 mm round)
  • Min. bar length 2,000 mm
    (> 8.0 mm to 32.0 mm round)
  • Max. bar length 6,000 mm (> 32.0 mm round)
  • Max. bar length 12,000 mm (> 10.0 mm < 25.0 mm and on request)

Sections, cold drawn


Symmetrical sections

  • Squares
  • Hexagons
  • Octagons
  • Special sections to customer drawings from 0.5 mm² to 8,000 mm² cross-section



  • Diameter range 7.0 mm to 30.0 mm round (≤ 7.0 mm round on request)
  • Max. bar length 7,000 mm
  • 30° angle, alternatively 45°
  • End facing
  • Pointing, 0.7 mm x diameter
  Wire grinding


  • Starting diameter 6.5 mm to 21.0 mm round
  • Finished diameter 6.0 mm to 20 mm round

Non-destructive crack testing

  • 7.0 mm to 30.0 mm round
  • ≥ 30.0 mm round on request


Ultrasonic testing


  • 15.0 mm to 30.0 mm round
  •  > 30.0 mm round on request

Short lengths


  • Min. piece length 300.0 mm
  • Diameter range 10.0 mm to 30.0 mm
  • Flat 8.0 mm to 60.0 mm wide, 6.0 mm to 15.0 mm high
  • Length tolerance 0.3 mm

Adiabatic cutting


  • High-speed cutting of sections and round stock
  • Cross-sections: 5.0 mm² to 2,000 mm²



  • Bars: loose/in bundles/in crates
  • Coils: loosely wound/spooled/special packaging





To provide you with the best possible service, we use cookies on our website. By visiting and using our website you agree to the use of cookies. Get more information in our Privacy Policy.

Privacy Policy